- Process Control Applications
- Process Equipment Solutions
- About Us
- Contact Us
This heat exchanger control panel is designed to mount on an equipment skid. It’s primary function is to control a pump and valve based on an outdoor air temperature switch and a snow sensor.
In addition to providing its primary function, we provided design changes to reduce their skid production cost. We provide an enclosure designed to mount on the edge of their equipment skid. We provide the field cables to connect to skid mounted devices. These changes simplify skid production and access to the heat exchanger control panel.
The major panel components are; NEMA 4 enclosure, door mounted Main Circuit Breaker, Pilot Devices, Temperature Controller, top mounted alarm light and horn, bottom conduit penetrations, Main Circuit Breaker, Motor Starter, 120V and 12V Transformers, Relays, Timers, Field Cables.
Click here to see our Heat Exchanger Manufacturer Success Story. It’s a brief description of how we help them become more successful. Click here to see the Heat Exchanger Control Panel Submittal we produced
|Safety Certification Label||UL508A|
|Enclosure Type||Wall Mount|
|Enclosure Rating||NEMA 4|
|Incoming Power Voltage||480VAC 3 Phase|
|Incoming Power Connection||Main Circuit Breaker||Enclosure Penetration Provided|
|Incoming Power Disconnect||Main Circuit Breaker||Door Operator|
|Incoming Power Short Circuit Protection||Main Circuit Breaker|
|Outgoing Power Loads||7.5 HP 3 Phase AC Motor||Enclosure penetration provided|
|Motor Control||FVNR||Across the Line|
|Operator Controls||Main Circuit Breaker Operator
Flow Fail Indication (Reset)
Overload Indication (Reset)
Alarm Strobe Light
|Field Connections||Temperature Switch
|Cables provided for Flow Switch, Temperature Sensor and Valve Actuator.Enclosure penetrations provided.|
212 Main Street Newport News, VA 23601 757-599-6884