- Process Control Applications
- Process Equipment Solutions
- About Us
- Contact Us
This SCADA RTU panel is designed to mount inside of a heated Pump Station Building. Its primary function is being a Pump Station Control Panel with a redundant (Radio, Autodialer) communications interface back to the central monitoring system.
Our customer develops and maintains municipal water facilities and used to put their panels out for bid. Each new panel shop created new problems, so they issued an RFP to legitimize their selection of a preferred panel shop. They selected us and now specify us their preferred panel shop.
This is our customer’s standard 2 Pump constant speed Pump Station Control Panel. It includes a NEMA 12 enclosure, 120V Surge Suppression, Interior Lighting, Receptacle, UPS, 12VDC and 24VDC Power Supplies, PLC, HMI, Radio and Autodialer.
Click here to see the SCADA RTU Panel Submittal we produced
|Safety Certification Label||UL508A|
|Enclosure Type||Floor Mount||Wall Mount if small enough|
|Enclosure Material||Steel||Stainless if Outdoors|
|Enclosure Rating||NEMA 12||NEMA 4X if Outdoors|
|Incoming Power Voltage||120VAC|
|Incoming Power Connection||Terminals|
|Incoming Power Disconnect||None|
|Incoming Power Short Circuit Protection||Circuit Breaker|
|Outgoing Power Loads||None|
|Motor Control||None||Start Signals to remote equipment|
|Ethernet Switch Power||24VDC|
|Operator Controls||Operator Interface|
|Field Connections||PLC Digital Inputs / Outputs
PLC Analog Inputs / Outputs
212 Main Street Newport News, VA 23601 757-599-6884