- Process Control Applications
- Process Equipment Solutions
- About Us
- Contact Us
This NEMA 7 compressor control panel is designed to mount on an explosion-proof equipment skid located on an oil rig and be powered by the oil rig’s 600V power system. It’s primary function is to control an Air Compressor.
In addition to providing its primary function, we provided design changes to reduce their skid production cost. We provided a tall narrow enclosure. This allowed them to move the enclosure to the edge of their equipment skid. We also arranged the enclosure components to allow the conduit entry locations to be moved to the rear of the enclosure. These changes simplified skid production and access to the compressor control panel.
The major panel components are; NEMA 7 Enclosure, NEMA 7 Pilot Devices, NEMA 7 Window (to see Hour Meter), Incoming Power Distribution Block, 600V Phase Monitor, 600V Fuse Blocks, 600V Motor Starters, 120V Transformer, Relays, Timers, Terminals.
Click here to see our Air Compressor Manufacturer Success Story. It’s a brief description of how we help them become more successful. Click here to see the Compressor Control Panel (NEMA7) Submittal we produced
|Safety Certification Label||None Requested|
|Enclosure Type||Wall Mount|
|Enclosure Material||Cast Aluminum|
|Enclosure Rating||NEMA 7|
|Incoming Power Voltage||575VAC 3 Phase|
|Incoming Power Connection||Power Distribution Block||Enclosure Penetration Provided|
|Incoming Power Disconnect||None|
|Incoming Power Short Circuit Protection||Transformer and Fan Motor||Compressor Protected By Circuit Breaker Powering Panel.|
|Outgoing Power Loads||30 HP & 3 HP Motors||Enclosure penetration provided|
|Motor Control||FVNR||Across the Line|
|Operator Controls||Control Power Light
High Temperature Light
|Field Connections||Temperature Switch
|Enclosure penetration provided|
212 Main Street Newport News, VA 23601 Toll-Free: 888-542-2012 Local: 757-599-6884